post01

ultra high pressure boiler in vietnam applied in school

Purchased equipment: ultra high pressure boiler in vietnam applied in school
Location: WUXI China
Telephone: +86 13861509127
E-mail: lexie@zozen.com
Contact us for more details about our boilers, solutions and services.

High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ and reduce heat lost.Sufficient steam storage room and heating area to generate high quality steam and high thermal power.Condenser is added to recycle the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce flue gas emission temperature and increase the thermal efficiency over 98% and save operating cost.

Environmental protection

Big combustion chamber equipped with Low emission combustion burner effectively reduce the NOx to 30mg/m3. Smoke duct and smoke outlet use internal insulation to reduce operating noise.

Combustion chamber uses full membrane water cooling wall structure and pressurized combustion without smoke mixture.

Energy conservation

Good quality alumina silicate fiber and fire clay insulation material are used and the boiler body temperature is controlled below 45℃ and greatly heat loss is reduced. Combustion chamber is designed with narrow distance tube membrane water cooling wall which has good air proof to reduce heat lost and increase boiler thermal efficiency. Internal inspection holes uses high-alumina refractory and manhole cover seal devices, solving superheat problem in this part caused by using refractory bricks.

CNC manufacturing technology

The key processing technologies such as steel plate blanking, circling, drum and tube plate drilling adopt advanced CNC machining to reduce the assembly stress and prolong the service life of the boiler.

Steel tube cutting, thread tube pressing and convection tube processing all adopt advanced CNC technology.

Automatic production line.

Leave a Comment

pro_first

60 High Cube Waffle For Sale - Military Collectibles Onln

Locate 60 high cube waffle in stock and ready for shipping now. Featuring tons of 60 high cube waffle on sale now!

TITLE 260 – DEPARTMENT OF LABOR AND TRAINI

J. “High pressure boiler” or “High-temperature boiler” means a boiler in which water, oil, or other fluid is heated and intended for operation at pressures in excess of 160 psi and/or temperatures in excess of 250 degrees Fahrenheit.

TPS Review Kwang | Boiler | Steam Engi

High pressure turbine 18. absorbing the turbine and the remaining heat of the flue gases. and finally out of the boiler to a given high speed (3000/3600 rpm). Ltd. to reach higher temperature and pressure.

CoorsTek | Global Leader in Engineered Technical Cerami

CoorsTek manufactures heavy-duty components for high-pressure and high-temperature duty in the oil patch offshore drilling environments. CoorsTek ultra-high-purity ceramic components increase yields and lower costs for manufacturers of semiconductors. Luminous Waveforms Unveiled at The Colorado School of Mines CoorsTek Center for

Thermal Power Plants - Fuji Electr

Thermal Power Plants CONTENTS Recently, Fuji Electric has delivered a ultra-supercritical pressure steam turbine to the Isogo Thermal Power Station of The Electric Power Develop-ment Co. (EPDC). This ultra supercritical pressure (high-temperature turbine) UBE Industries, Ube plant (145 MW, largest private-

MADCAD.com - The Cloud-Based Reference Libra

117-10 Specification for Tolerances for Concrete Construction and Materials (ACI 117-10) and Commentary-Reapproved 2015

Numerical investigation on the flow, combustion, and NO

The tangentially fired pulverized-coal boiler considered in this research is a 660 MWe ultra-supercritical boiler as schematically shown in Figure 1. The height of the furnace exit is approximately 50.4 m, and the cross-section of the combustion zone has a width of 19.68 m and a depth of 19.23 m.

Bell Gossett B&G Series 1522 Pumps, Bell & Gossett 152

The Series 1522 is a rugged yet quiet pump due to the bronze sleeve bearing provided as standard on the pump and motor. The flexible spring coupler design between the pump and motor dampens any additional noise and vibration.

NFPA 1911: Inspection, Maintenance, Testing, an

Content Description Be confident in emergency vehicle performance and reliability with the 2017 edition of NFPA 1911. Conduct timely inspection, maintenance, and in-service testing of emergency vehicles to ensure prompt, reliable response and protect personnel on board.

District heating system operation in power - SpringerLi

The back-pressure steam turbines operate with fixed power-to-heat ratio which results in less flexibility. The feasible operation zone is represented by an inclined line shown in Fig. 2 b. In some installations, there is the possibility for the steam to bypass the turbine and operate in heat boiler mode.

RKS Consulting and Commissioning, Inc – Making Building

Head pressure control is a simple concept that is applied to protect refrigeration circuits from [] High Efficiency Boilers in a Low Efficiency System Hot water boiler efficiency has come a long way over the past decade and manufacturer's are advertising condensing boilers with a thermal efficiency of 98 to 99%.